Renogy 10 Amp PWM Charge Controller

Renogy 10 Amp PWM Charge ControllerRenogy 10 Amp PWM Charge Controller
Move your mouse over image or click to enlarge
Renogy 10 Amp PWM Charge Controller Renogy 10 Amp PWM Charge Controller Renogy 10 Amp PWM Charge Controller
Brand: REN
Product Code: CTRL-PWM10
Availability: In Stock
Price: $21.99
Qty:     - OR -   Add to Wish List
Add to Compare

Charge Controller

The main advantage of Pulse Width Modulation (PWM) from PurelySolar.com is that power loss in the switching devices is very low. When a switch is off, there is practically no current. When the device is on, there is almost no voltage drop across the switch. Power loss, being the product of voltage and current, is thus in both cases close to zero. PWM also works well with digital controls, which, because of their on/off nature, can easily set to the needed duty cycle.

This solar system controller adopts the most advance digital techniques and operates fully automatically. The PWM battery charging can greatly increase the lifetime of your battery and has various unique functions and quite easy to use features.

Please Note: This is Positive Ground Controller. If grounding is necessary, it must be completed on the positive line. If the controller is to be used on a vehicle which has battery negative on the chassis, loads connected to the controller must not have an electrical connection to the vehicle body.

• Micro controller digital accuracy
• High Efficiency PWM charge mode State of charge(SOC)
• Temperature compensation
• Automatic detection of the voltage
• Short circuit protection
• Battery Reverse polarity protection
• Reverse current protection at night
• Over charging or discharging protection
• Over load protection

Please Note: This is Positive Ground Controller. If grounding is necessary, it must be completed on the positive line. If the controller is to be used on a vehicle which has battery negative on the chassis, loads connected to the controller must not have an electrical connection to the vehicle body.

10 Amp Charge Controller

  • Auto Detection of 12 volt and 24 volt system
  • Helps prevent the overcharging and discharging of batteries
  • Keeps batteries in a fully charged state to maintain voltage
  • Handles up to 120 watts and 240 watts of solar power for 12 volt and 24 volt system
  • Handles up to 10 amps of array current
  • Small and compact for added convenience
  • Maintenance free protection of your solar panels and batteries
  • LED indicator shows when charging and when system is over voltage

Technical Information for 12V Systems:

  • Dimension: 5.1×3.1×1.5 inches
  • Rated solar input: 10A
  • Rated Load: 10A
  • 25% Overload: 1 minute
  • Load disconnect: 11.1V
  • Load reconnect: 12.6V
  • Equalization voltage (30 minutes): 14.6v
  • Boost voltage (30 minutes): 14.4v
  • Float voltage: 13.6v
  • Temp Comp. (mV/C°):-30mV
  • Temperature: -35°C to +55°C
  • For wire sizes to 6mm2

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: